Footing Step Templates: Copy Job to Global ( Utility Functions )

An SDS2 Concrete or SDS2 Concrete Station license is required to enable the use of this utility.

• Job footing step templates are stored in your current Job and can only be used in that Job.
• You can use Copy Job Footing Step Templates to Global to copy templates that you have created in your current Job to the library of global templates, which are stored in the data directory used by your current version of this program.
• That way, if you later Home > press the current Job name to change to a different Job and want to copy a footing step template for use in that Job, you can use a related utility to Copy Global Footing Step Templates to Job .
• The number or names of templates currently in your current Job does not change as a result of your using this utility.
• See (on this page):
  
  
  • Step-by-step instructions
    • Start up the utility
    • Select the job footing step templates you want to copy

Also see :

• Copy Global Footing Step Templates to Job (a related utility)
• Concrete templates (types)

page 1 | contents | home > utilities > utility functions > copy job to global >

---

Step-by-step instructions :

1 . Start Copy Job Footing Step Templates to Global using the following method:

Method 1 : Home > Utilities > Utility Functions > Copy Job to Global > Copy Job Footing Step Templates to Global . If prompted to do so, enter the " Utility Password " that has been set up for your network.

2 . A selection dialog opens. On it is a list of the footing step templates in your current Job .

CF_Example_S1  CF_Example_S10  CF_Example_S4  CF_Example_S5  CF_Example_S7  CF_Example_S9  GB_Example_S11  GB_Example_S2  GB_Example_S3  GB_Example_S6  GB_Example_S8

Note: If there are no footing step templates in your current Job, you will be notified of such, and this operation will end without the selection dialog being opened.

Alternative 1 : Select the names of the templates that you want to be copied to the global footing step templates repository, then press the " OK " button at the bottom of this selection dialog. Go to step 3.

Alternative 2 : Press the " Cancel " button to end the Copy Job Footing Step Templates to Global operation. Do not continue.

3 . One of the following happens:

Possibility 1 : An alert dialog opens if any of the footing step templates you selected in step 2 reside in the global repository. If you press " Yes " on this dialog, you will overwrite the footing step templates with those in your current Job. If you press " No " on this dialog, the Copy Global Rebar Items... operation ends. Do not continue.

One or more of the selected items already exists. Do you want to overwrite?

Note: Since global templates cannot be used directly to define a footing step profile, there is no danger that overwriting such global templates will have negative repercussions for the model. Only job footing step templates can be accessed by footing step edit screens -- global templates cannot.

Possibility 2 : None of the templates you selected in step 2 reside in the global repository. The templates are copied to the repository, and the operation ends.

4 . The templates selected in step 2 continue to exist in your Job as footing step templates and copies of these same templates are now global footing step templates. Users who want to use the templates you just copied in their own Jobs can do so by using a related utility called Copy Global Footing Step Templates to Job .

page 1 | contents | home > utilities > utility functions > copy job to global > | top